HYDROPOWERENGINEERS Products
Bangalore Division 08048061668 hpes_bg@yahoo.co.in
919845134513
Chat with us  

Chat with us on WhatsApp

×
Preview

This is your website preview.

Currently it only shows your basic business info. Start adding relevant business details such as description, images and products or services to gain your customers attention by using Boost 360 android app / iOS App / web portal.

HYDROPOWERENGINEERS 56ecd8679ec68a0a24c2e6cb Products https://www.hydropowerengineers.in
Home
products
Quote
Menu
Home Products hydraulic press manufacturer

Our Products

hydraulic press manufacturer
Compactor is a kind of H type Hydraulic Press. It is used to compress drum into 1/5th of its original size. The drum consists of harmful radioactive materials. The size of the drum is Ø860 x 882 height made of mild steel sheet. The main pressing cylinder creates 200tons of load with the working pressure of 200Bar and compresses the drum.While pressing there should not be any leakage of harmful gases/liquids. The Compactor is making a sealed atmosphere while pressing. With the use of Blower and Damper which is having HEPA Filter, this machine assures safety. Thus this machine provides a secure compression and disposal of nuclear wastes.Specifications :1. Main cylinder Tonnage: 200T.2. Working pressure: 200 Bar.3. Table size: 1000x1000mm .4. Daylight of the press: 1200mm.5. Inlet Conveyor length: 2000mm.6. Outlet Conveyor length: 1000mm.7. Oil tank capacity: 800liters.8. Motor H.P: 30H.P.9. Double vane pump: 228+53Lpm.10. Mode of operation: Manual/Push button/PLC.
Compactor
VIEW DETAILS
The H-Frame Press is a machine powered by high pressure fluid and used for working of materials by pressure. The Hydraulic press depends on Pascal’s principle - “The pressure throughout a closed system is constant”. The force is developed by a piston of a working cylinder to which fluid (water or oil) under high pressure is admitted. The piston in turn is connected to the working tool.The Hydraulic press maybe driven by a pump or a pump accumulator station with steam, air, hydraulic or electromechanical actuation. Our following hydraulic press is having three basic operation.• Feeding• Pressing• EjectionFeeding unit:The Feeding unit having two feed cylinders and a roller conveyor to feed the mould to the center pressing area of the press.Pressing unit:The Pressing unit having a massive 400T cylinder mounted at the top plate of the press guided with linear guide system does the job by compressing the mould with suitable temperature for specified time.Ejection unit: The Ejection unit having an ejection cylinder mounted below the bed plate of the press ejects the job. Thus the cycle continues and the machine manufactures the components with ease.Specification :1. Main cylinder tonnage: 400T.2. Feed cylinder tonnage: 10T.3. Ejection cylinder tonnage: 50T .4. Working pressure: 150 Bar.5. Table size: 1650x1650mm.6. Daylight of the press: 1000mm.7. Oil tank capacity: 500liters.8. Motor H.P: 20H.P.9. Pump flow: 100+10Lpm.10. Mode of operation: Manual/Push button/PLC.Applications :This machine is specially designed for moulding application. It moulds the component with the massive load of 400T.
H Frame Press-400T
VIEW DETAILS
Hydraulic Press is a machine in which a large force is exerted on the larger of two pistons in a pair of hydraulically coupled cylinders by means of a relatively small force applied to the smaller piston. They display superior performance through innovative ideas. The hydraulic presses range from 5 Tons to 5000 Tons capacity.Hydraulic press of Hydropower is the result of constant R & D, backed by more than two decades of experience in Electro-hydraulics. The experience we've obtained as well as our customers input has been the basis for the improvement we do in our hydraulic presses.Right from a simple half tonne capacity bench press to 2,000 tonnes capacity high-speed electro-hydraulic trimming press, our company has developed technology and capacity to manufacture complicated automatic/semi automatic hydraulic press. These are suitable for various applications including sheet metal working, power metallurgy and for forging industry.
Hydraulic Press
VIEW DETAILS

Filter using tags

Hydraulic Press manufacturerhydraulic press manufacturer in BangaloreHydraulic press manufacturer in INDIAhydraulic compactor manufacturerVOLUME REDUCTION MACHINECOMPRESSION PRESSCOMPACTORSCRAP COMPACTORHydraulic Upsetter manufacturerTube-Upsetting-Machine manufacturerH Frame Press-400TC Frame Hydraulic Press in BangaloreC Frame Hydraulic PressBEND REMOVAL PRESSGOOSE NECK PRESSRubber Moulding Hydraulic Press MnaufacturerRubber Moulding Hydraulic Press ManufacturerUPSETTING MACHINE MANUFACTURERUPSETTING MACHINEROD UPSETTERPIPE UPSETTERPUP JOINT UPSETTEROIL AND GAS TUBINGSMetal Gathering machineEnd forming machinetube forgingHot forgingPush pointing machine manufacturer in INDIAPush pointing machine manufacturerHydraulic pointing machineTUBE DRAWINGTUBE DIAMETER REDUDTIONTube Swaging Machine manufacturer in INDIAPipe end forming Machine manufacturer in BANGALOREPipe Swaging Machine manufacturer in INDIAPipe Swaging Machine manufacturer in BANGALOREPipe Chamfering machine manufacturerEdge preparation machine manufacturerPipe Chamfering machine manufacturer in INDIAtube swaging in Bangalorejob work in Tube tapering in Bangalorefurniture legs manufacturer in BangaloreFurniture leg manufacturer in INDIA.Decorative tubes in Bangalore
Compactor is a kind of H type Hydraulic Press. It is used to compress drum into 1/5th of its original size. The drum consists of harmful radioactive materials. The size of the drum is Ø860 x 882 height made of mild steel sheet. The main pressing cylinder creates 200tons of load with the working pressure of 200Bar and compresses the drum.While pressing there should not be any leakage of harmful gases/liquids. The Compactor is making a sealed atmosphere while pressing. With the use of Blower and Damper which is having HEPA Filter, this machine assures safety. Thus this machine provides a secure compression and disposal of nuclear wastes.Specifications :1. Main cylinder Tonnage: 200T.2. Working pressure: 200 Bar.3. Table size: 1000x1000mm .4. Daylight of the press: 1200mm.5. Inlet Conveyor length: 2000mm.6. Outlet Conveyor length: 1000mm.7. Oil tank capacity: 800liters.8. Motor H.P: 30H.P.9. Double vane pump: 228+53Lpm.10. Mode of operation: Manual/Push button/PLC.
View Details
Compactor
The H-Frame Press is a machine powered by high pressure fluid and used for working of materials by pressure. The Hydraulic press depends on Pascal’s principle - “The pressure throughout a closed system is constant”. The force is developed by a piston of a working cylinder to which fluid (water or oil) under high pressure is admitted. The piston in turn is connected to the working tool.The Hydraulic press maybe driven by a pump or a pump accumulator station with steam, air, hydraulic or electromechanical actuation. Our following hydraulic press is having three basic operation.• Feeding• Pressing• EjectionFeeding unit:The Feeding unit having two feed cylinders and a roller conveyor to feed the mould to the center pressing area of the press.Pressing unit:The Pressing unit having a massive 400T cylinder mounted at the top plate of the press guided with linear guide system does the job by compressing the mould with suitable temperature for specified time.Ejection unit: The Ejection unit having an ejection cylinder mounted below the bed plate of the press ejects the job. Thus the cycle continues and the machine manufactures the components with ease.Specification :1. Main cylinder tonnage: 400T.2. Feed cylinder tonnage: 10T.3. Ejection cylinder tonnage: 50T .4. Working pressure: 150 Bar.5. Table size: 1650x1650mm.6. Daylight of the press: 1000mm.7. Oil tank capacity: 500liters.8. Motor H.P: 20H.P.9. Pump flow: 100+10Lpm.10. Mode of operation: Manual/Push button/PLC.Applications :This machine is specially designed for moulding application. It moulds the component with the massive load of 400T.
View Details
H Frame Press-400T
Hydraulic Press is a machine in which a large force is exerted on the larger of two pistons in a pair of hydraulically coupled cylinders by means of a relatively small force applied to the smaller piston. They display superior performance through innovative ideas. The hydraulic presses range from 5 Tons to 5000 Tons capacity.Hydraulic press of Hydropower is the result of constant R & D, backed by more than two decades of experience in Electro-hydraulics. The experience we've obtained as well as our customers input has been the basis for the improvement we do in our hydraulic presses.Right from a simple half tonne capacity bench press to 2,000 tonnes capacity high-speed electro-hydraulic trimming press, our company has developed technology and capacity to manufacture complicated automatic/semi automatic hydraulic press. These are suitable for various applications including sheet metal working, power metallurgy and for forging industry.
View Details
Hydraulic Press

  • Filter Using Product Tags

Products Categories

Have any question or need any business consultation?

Contact Us

Have any question or need any business consultation?

Contact Us
Chat with us  

Opening Hours

    Subscribe Us

    Subscribe to our newsletter!
    Hydropower Engineers

    Social share